Copyright © Kunshan Pinhong EPT Co.,Ltd All rights reserved. Site Map Designed by iwonder.cn
Kunshan Pinhong EPT Co.,Ltd
Kunshan Pinhong EPT Co.,Ltd
Add : (Qiandeng Yuanchuang Base) No. 125, Jinxing South Road, Qiandeng Town, Kunshan, Jiangsu, China
Tel : （0086）15995617314
Fax : +86-512-50130524
E-mail :lvfang@ksphxs.com
Replacing an disc diffuser is generally a straightforward process, and here are the general steps:
Turn off the Air Pump: First, ensure that the air pump connected to the disc diffuser is switched off to halt the air supply. | |
Remove the Old disc diffuser: If the old disc diffuser is secured with silicone sealant or other sealing materials, carefully remove it. You can gently peel or unscrew it with a tool. If the disc diffuser is connected by an air tubing, detach the tubing from the old disc diffuser.
Install the New disc diffuser: Place the new disc diffuser in the same location as the old one. If necessary, use silicone sealant or other sealing materials to secure the new disc diffuser in place to prevent air leakage. If there is an air tubing connection, attach the tubing to the new disc diffuser's air inlet.
Turn on the Air Pump: Re-enable the air pump to begin air supply. Test: Ensure the new disc diffuser operates smoothly, with air evenly distributed into the water. Check the distribution and intensity of bubbles to ensure they meet the oxygen needs of your aquatic organisms.
In general, replacing an disc diffuser is relatively simple and typically does not require special tools or complex procedures. However, before replacing it, make sure you have the new disc diffuser ready and possess basic safety knowledge. If you lack confidence in replacing the disc diffuser or have specific equipment requirements, it's advisable to consult a professional aquarist or relevant experts for guidance. |