Copyright © Kunshan Pinhong EPT Co.,Ltd All rights reserved. Site Map Designed by iwonder.cn
Kunshan Pinhong EPT Co.,Ltd
Kunshan Pinhong EPT Co.,Ltd
Add : (Qiandeng Yuanchuang Base) No. 125, Jinxing South Road, Qiandeng Town, Kunshan, Jiangsu, China
Tel : （0086）15995617314
Fax : +86-512-50130524
E-mail :lvfang@ksphxs.com
Good anti-blocking and anti-backflow. The aerator is in the shape of a spherical crown. Even if the water quality of the aeration tank is complex, it still operates intermittently, and the surface is not easy to accumulate mud. The diaphragm punching technology is unique and advanced, which is obliquely cut. In addition, a special-shaped sealing ring is set in the center of the top to more effectively prevent the backflow of water.
The diaphragm is highly tear-resistant. The rubber diaphragm is in the shape of a spherical crown. When working, the opening of the hole is evenly stressed, the degree of fatigue deformation is reduced, the resilience is good, it is not easy to tear, and the service life is long.
Uniform air distribution, energy saving and high efficiency. The working surface of the spherical crown aerator is relatively larger than that of the flat type, the bubbles are small, the air distribution is uniform, the oxygenation efficiency is high, and the treatment effect is good. Especially when working with low air volume, this characteristic can still be brought into play, and the operation and management are convenient.
Anti-aging, anti-corrosion. The spherical crown-shaped aeration diaphragm is made of high-quality rubber, and the supporting tray and wedge-shaped insert are evenly made of engineering plastics. These grades have excellent physical and mechanical properties. Excellent aging resistance, and chemical corrosion resistance such as acid, alkali and chemical resistance.
The resistance loss is small. Due to the unique anti-blocking and backflow performance of the waterproof body of the aerator, the check valve attached to the flat-plate microporous aerator is removed, thereby reducing the resistance of the aerator. Energy consumption is saved.
