The material of diaphragm aerator

Views: 238 Author: Site Editor Publish Time: Origin: Site

The purpose of installing aeration in wastewater is to have sufficient dissolved oxygen. In addition, the microporous aeration disc also prevents the suspended solids in the pool from moving down. The diaphragm aerator can increase the organic compounds and dissolved oxygen in the pool. The effect of touching. In order to ensure that the microorganisms in the pool can oxidize and dissolve the organic compounds in the wastewater under the condition of sufficient dissolved oxygen, Kunshan Pinhong will introduce the performance of the diaphragm aerator.

The service life of the aerator mainly depends on the aerator diaphragm. The chassis of the diaphragm aerator is made of new ABS raw materials, and the material of the aeration diaphragm is divided into TPU, EPDM rubber and silica gel. The aerators of each aerator manufacturer are slightly different. First, let’s talk about the feel of the aerator diaphragm from the diaphragm, the selection of raw materials, the production process, the brightness and fineness of the diaphragm are all different, the aeration The diaphragm of the device must have ductility and tensile and tear strength, which are difficult to distinguish with the naked eye.

Kunshan Pinhong disc aerator selects raw materials, the aeration diaphragm is fine in touch and full of ductility, with many holes and small bubbles, and high oxygen utilization rate. The Shihuan environmental protection aerator has been tested by the testing center, and the water depth in the test is 6 meters , The oxygen utilization rate can reach 45%. The base of the aerator is not easy to break, and the British thread is convenient to connect. There are two connection methods: saddle seat connection and snap ring connection, which are easy to install.


×

Contact Us

captcha